Sharp MD-MT290H Operation Manual page 17

5
Press the MENU/ENTER button.
6
Press the or button repeatedly to se-
lect "REC MODE".
7
Press the MENU/ENTER button.
8
Press the or button repeatedly to se-
lect the recording mode (page 22).
(Stereo recording)
SP
(2 times long recording)
(4 times long recording)
(Monaural recording)
9
Press the MENU/ENTER button.
The mode will be set automatically after 7 seconds
even if the MENU/ENTER button is not pressed.
10
Press the button to start the MiniDisc
unit recording.
11
Begin playback on the stereo system, the
output will be recorded.
Notes:
! Complete the operation within 7 seconds whilst selecting
the menus.
! Changing the volume level whilst recording does not affect
the recording.
! You cannot adjust the bass level whilst recording.
To interrupt recording
Press the button.
! To resume recording, press the
button again.
! The track number will be increased by one each time the
recording is interrupted.
To stop recording
Press the :OFF/HOLD button.
Notes:
! Whilst "TOC" is displayed, the MiniDisc recorded contents
are not yet updated.
! It is not possible to remove the MiniDisc whilst "TOC" is
displayed, to prevent the new recording from being lost.
TOC display
To update the recorded contents of the
MiniDisc
Press the :OFF/HOLD button whilst in the stop mode.
The power turns off after recorded contents have been
updated on the MiniDisc.
02/12/18 MD_MT290H_UK_3.fm
MD-MT290H
6
5
4
3
2
1
17