Titling A Minidisc - Sharp MD-MT290H Operation Manual

Titling a MiniDisc

MD-MT290H
! Creating disc and track names
Load a MiniDisc to be named. A playback only or record-
ing prevented MiniDisc cannot be edited.
1 <Disc name>
Whilst in the stop
mode, press the MENU/
ENTER button.
2
Press the or button repeatedly to se-
lect "EDIT".
3
Press the MENU/ENTER button.
4
<Disc name>
Press the or but-
ton repeatedly to select
"DISC NAME".
5
Press the MENU/ENTER button.
Cursor
" The unit will enter the character input mode.
" To cancel the operation, press the :OFF/HOLD
button.
34
6
Press the
type of characters.
<Track name>
Whilst in the pause
mode, press the MENU/
(Capital letters) (Lower-case letters) (Numbers and symbols)
ENTER button.
The first 3 characters in the group of the selected
characters will be displayed for about 1 second.
7
Press the
lect the letter.
<Track name>
Press the or but-
ton repeatedly to select
"TRACK NAME". 8
Press the MENU/ENTER button to enter it.
Position where the next letter will be entered
Note:
Complete the operation within 7 seconds whilst selecting
the menus.
02/12/18
button repeatedly to select the
or button repeatedly to se-
MD_MT290H_UK_5.fm