Playback - Sharp MD-MT290H Operation Manual

Playback

MD-MT290H
Left Right
channel channel
L
R
To the
REMOTE
/PHONES
socket
1
Insert the earphones plug firmly into the
earphones socket on the remote control
unit.
2
Plug the remote control into the REMOTE/
PHONES socket on the unit.
3
Insert a MiniDisc (page 11).
18
4
Press the button.
Playback starts automatically with a playback only
MiniDisc or a MiniDisc which is protected against ac-
cidental erasure (Auto-play function).
To interrupt playback
Press the button.
To resume playback, press the button again.
To stop playback
Press the :OFF/HOLD button.
The power will turn off automatically after 2 minutes if the unit
is left in the stop mode.
To turn off the power
Press the :OFF/HOLD button whilst in the stop mode.
Notes:
! Reduce the volume before starting to play. MiniDiscs,
compared to ordinary cassette tapes, have very little
noise. If the volume is adjusted according to your usual
expectations of noise, high volume may damage your
hearing.
! The sound escaping from your earphones may annoy
people around you. In particularly crowded places (such
as on trains or buses), reduce the volume.
" Volume control
Press the VOL + button to increase
the volume and the VOL - button to
decrease the volume.
Volume (0 - 30)
02/12/18 MD_MT290H_UK_3.fm