Sharp MD-MT290H Operation Manual page 33

! To display the playing time of an indi-
vidual track
1
Whilst in the stop mode, press the
button to display the track number and track
name.
Track number
Track name
2
Press the MENU/ENTER button.
3
Press the or button repeatedly to se-
lect "DISPLAY".
4
Press the MENU/ENTER button.
5
Press the or button to select the play-
ing time.
Playing time
6
Press the MENU/ENTER button.
! Checking the remaining amount of bat-
tery level
The remaining amount of battery level is shown by the
battery indicator ( ) during operation.
or
How to read the battery indicator
When the battery
When the battery
level is high
level is very low
" When the battery level is very low, the battery indicator
will flash. Recharge the battery or replace the alkaline
battery with a new one.
" When the battery has run out completely, "BATT
EMPTY" will appear. Then, the power will be discon-
nected automatically.
Notes:
" If you use the battery which you stopped charging
halfway, " " may appear. It does not mean that the
battery is completely charged.
" The battery indicator will not correctly display the
remaining capacity for approximately 10 seconds after
the power has been turned on.
" When the AC adaptor or a separately available car
adaptor is used, the battery indicator will not be
shown.
" The number of bars shown in the battery indicator may
increase or decrease, depending on the operation
being performed. This is normal.
02/12/18 MD_MT290H_UK_4.fm
MD-MT290H
6
5
4
3
2
1
33