Sharp MD-MT290H Operation Manual page 24

Advanced Recording (continued)
MD-MT290H
! Playback sound-actuated recording
Recording automatically starts or pauses by detecting
sound from the stereo system (synchronised recording).
1
Press the REC button.
2
Begin playback on the stereo system con-
nected to this portable MD.
3
Press the or button to adjust the re-
cording level (see page 16).
4
Press the PAUSE button on the stereo sys-
tem to enter the playback pause mode.
Select the starting point for your recording and press
the PAUSE button.
5
Press the MENU/ENTER button.
6
Press the or button repeatedly to se-
lect "REC MODE".
24
7
Press the MENU/ENTER button.
8
Select the recording mode (step 4, page 22)
and press the MENU/ENTER button.
9
Press the MENU/ENTER button.
10
Press the or button repeatedly to se-
lect "SYNC ON".
11
Press the MENU/ENTER button.
" "SYNC" will flash.
" To cancel the operation, press the :OFF/HOLD
button.
" The mode will be set automatically after 7 seconds
even if the MENU/ENTER button is not pressed.
12
Begin playback on the stereo system.
Recording will begin automatically.
To interrupt recording
" When the stereo system is stopped, the unit will enter
the synchro recording pause mode. When playback is
resumed, recording will also resume.
" If a silence lasts for 3 seconds or more, recording will
be paused (pause function does not work for approxi-
mately 10 seconds after recording starts). When the
unit receives sound again, recording automatically
starts.
" A new track number is created when recording
resumes.
02/12/18 MD_MT290H_UK_4.fm