Changing Default Settings - Sharp MD-MT290H Operation Manual

Changing Default Settings

Whilst in the stop mode ...
1
With a MiniDisc inserted, press the MENU/
ENTER button for 2 seconds or more. "SET
UP" will appear.
When you release the button, "BEEP" will flash.
2
Press the or button to select the menu.
3
Press the MENU/ENTER button to display
the setting item.
4
Press the or button to select the set-
ting items.
5
Press the MENU/ENTER button.
MENU SETTING ITEM
BEEP (Confirmation BEEP ON* Beep
sound)
BEEP OFF Silent
AUTO PLAY (Auto A-PLAY ON* Set.
play)
A-PLAY OFF Cancelled.
POWER SAVE (Auto AUTO Psave* Set.
power save)
Psave OFF Cancelled.
D-LEVEL (Digital re- D.L MODE 1* Setting re-
cording level) tained.
D.L MODE 2 Cancelled.
(*) indicates default setting.
! Beep sound
You can eliminate the confirmation sound that beeps
when you press a button.
! Auto play
You can make the unit not play automatically when you
insert a playback-only MiniDisc or an accidental erasure
protected MiniDisc.
! Auto power save
When the unit is used in a place exposed to much vibra-
tion, sound skipping can be decreased by cancelling the
auto power save function. (Battery will drain faster.)
What is auto power save function?
During playback, maximum 40 seconds (in stereo) of
musical information is stored. Auto power save function
automatically adjusts the storage time between 5 and 40
seconds to reduce the power consumption. If this func-
tion is cancelled, the storage time cannot be adjusted.
" If this unit is used with the AC adaptor, the storage
time will be 40 seconds regardless of the settings.
" The storage time varies depending on the recording
mode.
! Digital recording level
"D.L MODE 1"
The digital recording level you set will be kept even after
cancelling recording.
"D.L MODE 2"
Every time you cancel recording, the level will return to
[D.L 0dB].
02/12/18 MD_MT290H_UK_4.fm
MD-MT290H
6
5
4
3
2
1
31