Using With The Ac Adaptor; Using With The Alkaline Battery - Sharp MD-MT285E Operation Manual

Using with the AC Adaptor

Plug the AC adaptor into the wall socket, and then insert
the plug on the other end into the DC IN 5V socket.
Caution:
! Insert the plugs firmly.
! When the unit is not in use for extended periods,
remove the AC adaptor from the wall socket.
Note:
If power failure occurs whilst playing a disc using the AC
adaptor, disconnect it from the wall socket. Otherwise,
playback may start automatically when electricity resumes.

Using with the Alkaline Battery

Use one commercially available alkaline battery (LR6,
"AA" size).
1
Push and slide the battery cover.
2
Open the battery cover.
3
Insert an alkaline battery according to the
direction indicated in the battery compartment.
When inserting or removing the battery, push it to-
wards the battery terminal.
4
Close the battery cover.
1 2 3
MD-MT285E TINSE0539AWZZ
To the wall socket
To the DC IN 5V socket
Caution:
! Do not replace the battery during operation.
! Do not use a rechargeable battery (nickel-cad-
mium battery etc.).
! Remove the battery if the unit will not be used for long
periods of time. This will prevent potential damage due
to battery leakage.
! Installing the battery incorrectly may cause the unit to
malfunction.
Note:
For information about the battery life, see "Specifications"
on page 49.
03/7/15 MD_MT285E_2.fm
MD-MT285E
1
AC 230V,
50/60 Hz
2
3
4
5
6
7
8
9
9