Error Messages - Sharp MD-MT290H Operation Manual

Error Messages

MD-MT290H
ERROR
MESSAGES
The battery has run down.
BATT EMPTY
Nothing is recorded.
BLANK MD
(Replace the disc with a recorded disc.)
You tried to record from a copy pro-
Can't COPY
hibited MiniDisc.
(Record using the analogue cable.)
You tried to record signals other than
music (such as data).
A track cannot be edited.
Can't EDIT
(Change the stop position of the track
and then edit it.)
You tried to record or edit the MD
Can't LOCK
whilst operating the OPEN lever.
You tried to play back a track that
Can't PLAY
cannot be played with this equip-
ment.
The disc data cannot be read be-
Can't READ
cause the disc is damaged.
(*)
(Reload the Minidisc or replace it with
another one.)
Recording cannot be performed cor-
Can't REC
rectly due to vibration or shock.
44
MEANING ERROR
MESSAGES
Can'tSTAMP
Can'tWRITE
DEFECT!
DISC FULL
Er-MD (**)
HOLD
LOCKED
NO DISC
A number or symbol appears in (*) position.
MEANING
Stamp function does not work.
(Check the number of tracks.)
Cannot save the TOC information
correctly to a MiniDisc.
The disc is scratched.
(If the recorded sound is not right, retry
recording or replace the disc with a re-
cordable one.)
The disc is out of recording space.
The microprocessor has reported a
system fault and the unit is out of or-
der.
(To have it repaired, go to the distributor
where you purchased the unit.)
The unit is in the hold mode.
You removed a MiniDisc whilst re-
cording or editing.
(Turn off the power before removing the
MiniDisc.)
A disc has not been loaded.
02/12/18 MD_MT290H_UK_6.fm