Sharp MD-MT290H Operation Manual page 19

" Bass control
Each time the BASS button on the remote control is
pressed, the bass response will be switched as follows.
BASS 1 Emphasised slightly.
BASS 2 Emphasised more.
BASS 3 Emphasised fully.
BASS OFF Cancelled. (Default setting)
" To customise low and high levels
You can set 3 types of bass settings (BASS 1 - BASS 3)
by adjusting low (Lo) and high (Hi) boost for each setting.
Emphasising low (Lo) and high (Hi) sound of BASS 3.
Lo3 Hi3
BASS 3
Lo Frequency Hi
Lo5 Hi5
BASS 3
Lo Frequency Hi
1
During playback, press the MENU/ENTER
button.
2
Press the or
lect "SOUND ADJ" and then press the
MENU/ENTER button.
3
Press the or
ton repeatedly to select
bass setting, and the
VOL + or VOL - button to
select "B3".
4
After selecting "Lo" or
"Hi" with the
button, press the VOL +
or VOL - button to adjust
Default
the low or high sound
setting.
5
Press the MENU/ENTER button.
Repeat steps 1 - 5 to change the other bass setting.
Notes:
! If you set the volume to 23 or more, the bass boost will
be adjusted automatically.
! When you make the setting of "To customise low and
high levels" with the volume level set to 23 or more,
the volume level will be reduced to 22 automatically.
02/12/24
MD-MT290H
button repeatedly to se-
but-
B3
or
19
MD_MT290H_UK_3.fm
6
5
4
3
2
1