Sharp MD-MT290H Operation Manual page 45

ERROR MEANING
MESSAGES
Poor connection of the digital cable.
NO SIGNAL
No output signal comes out from the
connected unit.
(Use the AC power for the connected
unit.)
The input signal has improper sam-
pling frequency.
You tried to record on a playback-
PLAY MD
only disc.
AC adaptor other than specified.
POWER?
The write protection tab of a MiniDisc
PROTECTED
is set to the protected position.
Since a track number is currently be-
SORRY
ing located or updated, the unit can-
not accept your command.
(Wait a while and try the operation
again.)
ERROR MEANING
MESSAGES
The temperature is too high.
TEMP OVER
(Turn off the power, and wait a while.)
There is an error in the recording sig-
TOC FORM
nal.
(**)
(Erase all of the tracks, and then record
again.)
There is no space left for recording
TOC FULL
character information (track names,
disc names, etc.).
The track has been protected from
Tr. Protect
being erased.
(Edit the track with the device on which
it was recorded.)
A disc which contains data other
? DISC
than music was played.
(A disc which contains nonmusic data
cannot be played.)
There is an error in the signal record-
ed on the disc.
A number or symbol appears in (*) position.
02/12/18 MD_MT290H_UK_6.fm
MD-MT290H
6
5
4
3
2
1
45