Sending An Image Using Quick Send - Ricoh RDC-i700 Operation Manual

Sending an Image Using Quick Send

Quick send is used to send an image by mail to the same destination.
Important • Before using the quick send function, you must set the destination and
Note
image size in advance.
A Check that the image you want to
send has been selected.
• P.65 "Selecting an Image"
See
B Select [QUICK SEND].
C Check the address and the image size
and select [SEND].
• To cancel upload, select [CANCEL].
Note
• When the file size exceeds the memory size for processing the file,
Important
Note
error message will be displayed. Remedy it referring to the lists of
troubleshooting.
A connection to the Internet will be
established and the connection status will be
displayed.
• To cancel the connection, select
Note
[CANCEL].
P.44 "Setting Quick Send"
P.122 "Troubleshooting"
4
67