Using The Auto Power Off Function; Setting The Quick Zoom Function - Ricoh WG-30 Operating Manual

Using the Auto Power Off Function

You can set the camera to turn off automatically when no operation is performed
for a fixed time.
1
Use the four-way controller (23) to select [Auto Power Off]
in the [W Setting] menu.
2
Press the four-way controller (5).
A pull-down menu appears.
3
Use the four-way controller (23) to select the time until the
camera turns off automatically.
Choose from [5min.], [3min.] or [Off].
4
Press the 4 button.
The setting is saved.
Auto Power Off does not function in the following situations:
• While taking pictures in j (Continuous Shooting) and c (Burst Shooting)
modes
• While recording a movie
• During a slideshow or movie playback
6
• While the camera is connected to a computer
• While images are being transferred in Eye-Fi communication.

Setting the Quick Zoom Function

While playing back images in Q mode, you can set whether to use [Quick Zoom]
to magnify the playback image up to 10x when pressing the y button once.
1
Use the four-way controller (23) to select [Quick Zoom] in
the [W Setting] menu.
2
Use the four-way controller (45) to switch between O (On) or
P (Off).
O (On) The Quick Zoom is available.
P
162
(Off) The Quick Zoom is not available.