Troubleshooting; Operation Indicator - Epson EMP EMP-9100 Owner's Manual

Troubleshooting

When you think you have a problem, first of all check the Indicators on the projector.
The projector is fitted with Operation Indicator, Lamp Indicator and Temperature Indicator to
advise the user of the projector's status.

Operation Indicator

Indicator Status
Illuminated in
Orange
Blinking in
Orange
Illuminated in
Green
Blinking in
Green
Illuminated in
Red
78 - Troubleshooting
Cause
Stand-by status (Not an error)
Projection will be started when the [Power]
button is pressed.
Cool-down proce- (Not an error)
dure in progress · Wait for a moment. The acount of time for the
projector to cool down (cooling the lamp) will
depend on the external temperature, etc.
· The [Power] button cannot be used during
the cool-down period. This will be
illuminated in orange once the cool-down
process has been completed, so press the
button once more then.
Projection in (Not an error)
progress
Warm-up in (Not an error)
progress · Wait for a moment.
· The amount of time required for the warm-up
procedure is approximately 30 seconds.
· The green lamp will stop blinking and
become illuminated once the warm-up
procedure has been completed.
Internal error Cease operations, remove the Power Plug from
the socket and contact your dealer or nearest
adress provided at page 104 and request
repairs.
Operation Indicator
Lamp Indicator
Temperature Indicator
Recovery or Status Reference
Page
39
46
40
40