When The Monitor Port Is The 5Bnc (When Connected To The Second Computer); When The Monitor Port Is 13W3 - Epson EMP EMP-9100 Owner's Manual

When the monitor port is the 5BNC (When connected to the
second computer)
Point
· Do not bind the Power Cable and the Computer Cable together. Failure to observe this
may result in malfunctions.
· An adapter may be required when making the connection depending on the stand of the
computer's port. Refer to the computer instruction manual for further details.
· There are cases where the optional Mac Desktop Adapter and Mac Monitor Adapter are
required when connecting up to a Macintosh.
· It is possible to establish connections with both the Computer #1 Port and the Computer
#2 Port when two computers are to be connected.

When the monitor port is 13w3

The Computer #1 Port is also connected to the D-Sub 15 port with the use of the conversion
cable when the 13w3 port is used for connecting the computer's monitor port to a work station.
· The projector's computer #1 mini d-Sub 15 Port is connected to the computer's monitor port
(13w3) with the 13w3 ↔D-Sub 15 cable (available on the open market).
· Set the switch to the analog setting (right-hand side) with the tip of a ballpoint pen or other
pointed object.
28 - Connecting the projector to a computer
Monitor port
(video port)
(supplied with the projector)
Monitor Port
13w3 Cable
(available on the open market)
Computer #1 mini D-Sub15 Port
Computer Cable
Computer #1 mini D-Sub15 Port