In The Case Of Rgb Image Signals - Epson EMP EMP-9100 Owner's Manual

In the case of RGB image signals

· Connect the projector's Computer #2 BNC Port to the video equipment with the component
image cable (available on the open market).
· Connect the supplied RCA Audio Cable (Red/White) to the S-Audio/Audio #2 Port if the
sound is to be output from the projector 's speakers.
To the audio output port L
(white)
To the audio output port R
(red)
Point
· Purchase the component image cable so that one end matches the BCN type port on the
projector and the other matches the port on the video equipment.
· Set the BNC parameter to [RGB] when the connection has been established. (see
page 67)
38 - Connecting the video equipment
R/Cr/Pr Port
To the R output port
To the G output port
To the B output port
For component images
Cable (available on the
open market)
RCA Audio Cable (supplied with the projector)
G/Y Port
B/Cb/Pb Port
Audio Port (white)
Audio Port (red)