Epson EMP EMP-9100 Owner's Manual page 43

2
Select the Port to which the connection has been made when more than one item of
equipment has been connected.
Press the port button connected to the computer or video equipment to switch the input
source.
Power
Computer
Computer
A/V mute
Resize
Video
Connected
Port
Computer #1 [Computer]
Port (will change when-
ever pressed)
BNC Port (RGB)
BNC Port [Video]
(YCbCr) (will change when-
ever pressed)
Video Port
S-Video Port
Point
· Projection will take place without pressing the button if only one item of equipment is con-
nected.
· Computer #1 when no input signals are detected despite the connection being in place
and when the images for the connected equipment are not output.
· The BNC port source that switches between [Computer] and [Video] on the main unit and
[Comp2/YcbCR] on the remote control can only display either BNC (RGB) or BNC
(YcbCr), depending on the BNC setting. (see page 67)
Menu
Help Esc
Video
Keystone
Shift Volume
Button to Select
Main Unit Remote Control
[Comp1]
[Comp2/ YCbCr]
[Video]
(will change when-
ever pressed)
Esc
Comp2/YCbCr
Menu Help
Comp1 Comp2/YCbCr
Comp1
Video
Auto Resize
P in P Preset
- Volume +
Display at the top
right-hand corner of
the screen
Computer1
BNC(RGB)
BNC(RGB)
BNC(YCbCr)
Video
S-Video
Video
Projection - 41