Spotlight - Epson EMP EMP-9100 Owner's Manual

4
Lower the [Enter] button on the remote control unit to move the cursor to the ending
position.
5
Press the [Enter] button to set the end position.
Point
· The efect function will be canceled and the cursor will disappear when the [Esc] button is
pressed prior to setting the position.
· The decoration will be erased when the [5] button is pressed.
· There are cases where the effect will be difficult to see depending on the color combina-
tion of the image's background and four corners. Amend the color of the corners in this
event. (see page 66)
· The mouse cannot be used when the effect function is in progress.

Spotlight

Shines a spotlight on a certain part of the image.
1
Press the [3] button.
Will switch between three different spotlight sizes whenever the [3] button is pressed.
2
Lower the [Enter] button to move the spotlight.
Point
· The efect function will be canceled and the spotlight will disappear when the [Esc] button
is pressed.
· The mouse cannot be used when the effect function is in progress.
Effect Function - 57