In the case of component (color differential*) image signals
· Connect the projector's Computer #2 BNC Port to the video equipment with the component
image cable (available on the open market) so that the following table is supported.
Video equipment
Projector
· Connect the S-Audio/Audio #2 ports with the RCA audio cable supplied (red/white) to out-
put sound from the projector's speakers.
To the audio output port L
(white)
To the audio output port R
(red)
Point
· A conversion connector (available on the open market) is required on the projector's BNC
port when a component image cable is connected. Align the video with the equipment
port.
· Set the BNC parameter to [CbCr] when the connection has been established. (see
page 67)
36 - Connecting the video equipment
R-Y(Cr)
R/R-Y
R/Cr/Pr Port
To the R-Y (Cr) output port
To the Y output port
To the B-Y (Cb) output port
For component images
Cable (available on the
open market)
RCA Audio Cable (supplied with the projector)
Y
B-Y(Cb)
G-RCG
G/Y Port
B/Cb/Pb Port
Audio port (White)
Audio port (Red)
B/B-Y