Replacing The Air Filter; Replacement Method - Epson EMP EMP-9100 Owner's Manual

Replacing the Air Filter

Replacement method

1
Switch off the power supply, allow the projector to cool down, and then disconnect the
Power Cord.
The amount of time required for the projector to cool down will depend on the surround-
ing temperature.
2
Remove the Air Filter.
Point
Ensure that the projector is stood on its end when replacing the Air Filter to prevent the dirt
and dust from penetrating inside.
3
Set a new Air Filter in place.
Point
Insert the clips before pressing on the catch to set the air filter in place.
90 - Replacing the Air Filter