Projection Angles - Epson EMP EMP-9100 Owner's Manual

Projection angles

The optimum projection screen is acquired by placing the center of the projector 's lens and a
right-angle to the screen.
When viewing from the side
* It is possible to move the projection position up and down with the lens shift function
A
B
A:B 10:Becomes 0
When viewing from the top or bottom
Point
Although the projection position can be adjusted with the foot lever (see page 45), there
are cases where the screen will distort into a trapezoid shape. In this event, adjust the trap-
ezoid distortion with the trapezoid correction function. (see page 46)
24 - Installation Procedure
Upward 20
A
B
A:B 5:Becomes 5
Downward 20