Connecting Up The Mouse (Wireless Mouse Function) - Epson EMP EMP-9100 Owner's Manual

Connecting up the mouse (wireless mouse function)

This enables the computer's mouse pointer to be operated with the remote control in the same
way as a wireless mouse.
Connect the projector's Mouse/Com Port to the computer's mouse port with the mouse cable
and Main Cable.
Computer
PC/AT
DOS/V
Macintosh
PS/2 Connection
(supplied with the projector)
Refer to the above table before making your selection.
Point
· Only the USB standard mounted model supports USB Mouse Cable connections. In the
case of Windows, only the Windows 98/2000 preinstalled model is supported. Operations
cannot be guaranteed on upgraded Windows 98/2000 environments.
· Only a computer mouse connected to the mouse/com port can be used.
· The mouse cannot be used when the effect function is in progress.
· There are cases where the computer must be set up. Refer to the instruction manual for
the computer for further details.
· Switch off the power to the projector and computer before making the connection.
· It is necessary to reboot the computer if it does not work.
Mouse to use
PS mouse
Serial mouse
USB mouse
Macintosh mouse
USB mouse
Mouse cable
Mause Port
Mouse Cable
Connecting the projector to a computer - 33
Mouse cable to use
PS/2 mouse cable (supplied)
Serial mouse cable (supplied)
USB mouse cable (supplied)
MAC mouse cable (supplied)
USB mouse cable (supplied)
Mouse/COM Port
Main Cable
(supplied with the projector)