Download Print this page

Advertisement

User's Manual for ELPLL02 Long-Focal Length Zoom Lens
This long-focal length zoom lens is designed for use only with EPSON
multimedia projectors.
It makes it possible to increase the distance between the projector and
the screen.
Please read this manual completely before use to assure maximum per-
formance.
Note that illustrations may differ slightly from your actual product.
Specifications are subject to change without notice.
Safety Precautions
To assure that this product is used safely, and to help prevent dam-
age or injury, the following symbols are used in the manual. Please
read this manual thoroughly before use to ensure safety and opti-
mum performance.
Ignoring this warning, or implementing the content in-
correctly, could result in injury or even death.
Memo
Warning
Important information, such as additional
explanations, key points to remember, and
things to avoid doing.
9

Advertisement

   Related Manuals for Epson ELPLL02

   Summary of Contents for Epson ELPLL02

  • Page 1

    User’s Manual for ELPLL02 Long-Focal Length Zoom Lens This long-focal length zoom lens is designed for use only with EPSON multimedia projectors. It makes it possible to increase the distance between the projector and the screen. Please read this manual completely before use to assure maximum per- formance.

  • Page 2

    1. Before mounting the zoom lens 1-1 Safety precautions Warning Be sure to screw the Long-Focal Length lens and adapter ring down completely. Unless they are securely screwed on, they could fall off and cause damage or injury (especially when the projector is ceiling-mounted). 1-2 Check product contents Make sure that you have all the parts, as shown below, before starting.

  • Page 3

    2. Mounting the zoom lens Warning Be sure to disconnect the power cable before installa- tion, because there is danger of electrical shock. Memo Note that the illustrations below may not match your par- ticular projector model. 2-1 Removing the current lens (1) Remove the front case.

  • Page 4

    (2) Remove the current lens. 1. Use the enclosed screwdriver to remove the four mounting screws, and dismount the current lens. 2-2 Mounting the zoom lens (1) Mounting the zoom lens 1. Remove the rear lens cap. 2. Use the enclosed screwdriver to mount the zoom lens with the four mounting screws.

  • Page 5

    (2) Mounting the front case 1. Set the front case into position and tighten the two screws. This completes installation. Turn on the power and verify that the projector operates nor- mally. Memo Be sure to remove the front lens cap before turning on the power, or it may melt from the heat.

  • Page 6

    4. Zoom lens specifications 4-1 Lens specifications 1. Focal length 2. Zoom ratio 3. f number 4. Projection size 5. Mass 4-2 Appearance with zoom lens mounted About 505mm 68.3 to 116.2 mm 1.7 x 2.14 to 2.98 60 to 300 inches 2100 g...

  • Page 7

    User’s Manual for Long Throw Zoom Lens ELPLL03 This long throw zoom lens is designed for use only with EPSON multi- media projectors. It makes it possible to increase the distance between the projector and the screen. Please read this manual completely before use to assure maximum per- formance.

  • Page 8

    1. Before mounting the zoom lens 1-1 Safety precautions Warning Be sure to screw the Long throw zoom lens and adapter ring down completely. Unless they are securely screwed on, they could fall off and cause damage or injury (es- pecially when the projector is ceiling-mounted).

  • Page 9

    2. Mounting the zoom lens Warning Be sure to disconnect the power cable before installa- tion, because there is danger of electrical shock. Memo Note that the illustrations below may not match your par- ticular projector model. 2-1 Remove the current lens (1) Remove the front case.

  • Page 10

    (2) Remove the current lens. 1. Use the enclosed screwdriver to remove the four mounting screws, and dismount the current lens. 2-2 Mounting the zoom lens (1) Mounting the zoom lens 1. Remove the rear lens cap. 2. Use the enclosed screwdriver to mount the zoom lens with the four mounting screws.

  • Page 11

    (2) Mounting the front case 1. Set the front case into position and tighten the two screws. This completes installation. Turn on the power and verify that the projector operates nor- mally. Memo Be sure to remove the front lens cap before turning on the power, or it may melt from the heat.

  • Page 12

    4. Zoom lens specifications 4-1 Lens specifications 1. Focal length 2. Zoom ratio 3. f number 4. Projection size 5. Mass 4-2 Appearance with zoom lens mounted About 505mm 144.1 to 194.5mm 1.35 x 2.60 to 3.27 80 to 300 inches 2100 g...

  • Page 13

    User’s Manual for ELPLR01 Rear Projector wide Lens This wide-angle lens is designed for use only on EPSON multimedia projectors. This lens is designed for use only on rear projection and rear projection box systems. Please read this manual completely before use to assure maximum per- formance.

  • Page 14

    1. Before mounting the wide-angle lens 1-1 Safety precautions Warning Be sure to screw the Rear Projector wide lens and adapter ring down completely. Unless they are securely screwed on, they could fall off and cause damage or injury (especially when the projector is ceiling-mounted). 1-2 Check product contents Make sure that you have all the parts, as shown below, before starting.

  • Page 15

    2. Mounting the rear-projection wide-angle lens Warning Be sure to disconnect the power cable before installa- tion, because there is danger of electrical shock. Memo Note that the illustrations below may not match your particu- lar projector model. 2-1 Removing the current lens (1) Remove the front case.

  • Page 16

    (2) Remove the current lens. 1. Use the enclosed screwdriver to remove the four mounting screws, and dismount the current lens. 2-2 Mounting the rear-projection wide-angle lens (1) Mounting the rear-projection wide-angle lens 1. Remove the rear lens cap. 2. Use the enclosed screwdriver to mount the rear projector wide lens with the four mounting screws.

  • Page 17

    (2) Adjusting the wide lens for a rear projector This lens must be adjusted to match the screen size. Adjust the lens as follows, before installing the front case. 1. Turn the lens shift button to move the lens all the way down. 2.

  • Page 18

    (3) Mounting the front case 1. Set the front case into position and tighten the two screws. This completes installation. Turn on the power and verify that the projector operates nor- mally.

  • Page 19

    4. Rear-projection wide-angle lens specifications 4-1 Lens specifications 1. Focal length 2. f number 3. Projection size 4. Mass 4-2 Appearance with rear projector wide lens mounted About 455mm 27mm 60 to 100 inches 1600 g...

  • Page 20

    User’s Manual for ELPLS01 Standard Lens This standard lens is designed for use only with EPSON multimedia pro- jectors. Please read this manual completely before use to assure maximum per- formance. Note that illustrations may differ slightly from your actual product.

  • Page 21

    1. Before mounting the standard lens 1-1 Safety precautions Warning Be sure to screw the Long-Focal Length lens and adapter ring down completely. Unless they are securely screwed on, they could fall off and cause damage or injury (especially when the projector is ceiling-mounted). 1-2 Check product contents Make sure that you have all the parts, as shown below, before starting.

  • Page 22

    2. Mounting the standard lens Warning Be sure to disconnect the power cable before installa- tion, because there is danger of electrical shock. Memo Note that the illustrations below may not match your par- ticular projector model. 2-1 Removing the current lens (1) Remove the front case.

  • Page 23

    (2) Remove the current lens. 1. Use the enclosed screwdriver to remove the four mounting screws, and dismount the current lens. 2-2 Mounting the standard lens (1) Mounting the standard lens 1. Remove the rear lens cap. 2. Use the enclosed screwdriver to mount the standard lens with the four mounting screws.

  • Page 24

    (2) Mounting the front case 1. Set the front case into position and tighten the two screws. This completes installation. Turn on the power and verify that the projector operates nor- mally. Memo Be sure to remove the front lens cap before turning on the power, or it may melt from the heat.

  • Page 25

    4. Standard lens specifications 4-1 Lens specifications 1. Focal length 2. Zoom ratio 3. f number 4. Projection size 5. Mass 4-2 Appearance with standard lens mounted About 475mm 49.2 to 68.9 mm 1.4 x 1.84 to 2.36 30 to 300 inches 1300 g...

  • Page 26

    User's Manual for the ELPLW01 Wide Zoom Lens This wide zoom lens is designed for use only with EPSON multimedia projectors. It makes it possible to decrease the distance between the projector and the screen. Please read this manual completely before use to assure maximum per- formance.

  • Page 27

    1. Before mounting the zoom lens 1-1 Safety precautions Warning Be sure to screw the Long-Focal Length lens and adapter ring down completely. Unless they are securely screwed on, they could fall off and cause damage or injury (especially when the projector is ceiling-mounted). 1-2 Check product contents Make sure that you have all the parts, as shown below, before starting.

  • Page 28

    2. Mounting the zoom lens Warning Be sure to disconnect the power cable before installa- tion, because there is danger of electrical shock. Memo Note that the illustrations below may not match your par- ticular projector model. 2-1 Removing the current lens (1) Remove the front case.

  • Page 29

    (2) Remove the current lens. 1. Use the enclosed screwdriver to remove the four mounting screws, and dismount the current lens. 2-2 Mounting the zoom lens (1) Mounting the zoom lens 1. Remove the rear lens cap. 2. Use the enclosed screwdriver to mount the zoom lens with the four mounting screws.

  • Page 30

    (2) Mounting the front case 1. Set the front case into position and tighten the three screws. This completes installation. Turn on the power and verify that the projector operates nor- mally. Memo Be sure to remove the front lens cap be- fore turning on the power, or it may melt from the heat.

  • Page 31

    4. Zoom lens specifications 4-1 Lens specifications 1. Focal length 2. Zoom ratio 3. f number 4. Projection size 5. Mass 4-2 Appearance with zoom lens mounted About 480mm 37.9 to 45.5 mm 1.2 x 2.34 to 2.65 60 to 200 inches 2600 g...

Comments to this Manuals

Symbols: 0
Latest comments: