Inserting The Remote Control Batteries - Epson EMP EMP-9100 Owner's Manual

Inserting the Remote Control Batteries

The remote control batteries are inserted in accordance with the following procedure:
Ensure that unused batteries of the same type are used.
1
Remove the Battery Cover.
Apply pressure to the clip holding the Battery Cover, and then lift it upwards.
2
Insert the batteries.
Ensure that the batteries are aligned correctly with the "+" and "-" labels on the remote
control.
3
Replace the cover.
Apply pressure to the battery cover until it clicks firmly into place.
Point
· Specified batteries: Two three-cell alkaline manganese batteries (LR6).
· The batteries should be replaced approximately once every three months when used for
thirty minutes per day.
Caution
Parts, Names and Operations - 21