Terminology - Epson EMP EMP-9100 Owner's Manual

Terminology

This section provides simple explanations for the terminology used within the manual, items
for which explanations are not available, and other complex processes.
A/V Mute
DVI-D port
D output port
Remote port
SRS
SVGA
SXGA
Sync(synchronization)
VGA
XGA
USB
UXGA
Color temperature
Color differential signal
Operating system
Temporarily erases the image and sound. The sound and image can be muted
by pressing the [A/V Mute] button on the projector. Press the [A/V Mute]
button once again or adjust the volume or display the menu to cancel the mute
mode.
The input port that supports DVI ratings and that is one of the types of com-
pression/playback technologies for digital audio.
The output port for digital tuners that support the new digital broadcasts
within Japan.
Enables the optional remote control receiver to be connected so that multiple
items of equipment can be operated with a remote control unit.
The three-dimensional acoustic system. This enables wide and deep sound to
be listened to. These are adjusted with the [Space] (wide) and [Center] (deep)
buttons.
IBM PC/AT compatible (DOS/V equipment) signals with 800 horizontal pix-
els and 600 vertical pixels.
IBM PC/AT compatible (DOS/V equipment) signals with 1,280 horizontal
pixels and 1,024 vertical pixels.
Outputs computer signals at a pre-determined frequency. The image will not
be projected clearly unless this frequency is aligned with the frequency of the
projector. Aligning the signal phasing is known as synchronization. Projected
images will be subject to distrubance, blurring and horizontal noise if not syn-
chronized.
IBM PC/AT compatible (DOS/V equipment) signals with 640 horizontal pix-
els and 480 vertical pixels.
IBM PC/AT compatible (DOS/V equipment) signals with 1,024 horizontal
pixels and 768 vertical pixels.
An abbreviation for Universal Serial Bus. This is an interface for connecting
comparitively low frequency equipment to the computer.
IBM PC/AT compatible (DOS/V equipment) signals with 1,600 horizontal
pixels and 1,200 vertical pixels.
The temperature of the subject that emits light. A blue hue is attained when
the color temperature is high, and a red hue is attained when the color temper-
ature is low.
Video equipment transmits signals through three cables as Red-Bright (R-Y),
Bright (Y) and Blue-Bright (B-Y). This enables the composite signals (the red,
green and blue signals and their brightness signals are transmitted along one
cable) to be projected more clearly.
The software necessary to operate the computer. The EMP Link V supplied
with the projector operates the computers with the use of the Windows 95
(Japanese version) operating system, the Windows 98 (Japanese version) oper-
ating system, the Windows NT 4.0 (Japanese version) operating system, the
Windows 2000 (Japanese version) operating system, and the Macintosh Kanji
Talk 7.5.5 or higher operating systems.
Terminology - 97