Remote Control; Light Button - Epson EMP EMP-9100 Owner's Manual

Remote Control

G Front Panel
1 [Freeze] button (see page 52)
Temporarily freezes the image. Press this button once more to cancel the freeze mode.
2 Remote control light-receiving area
Outputs the remote control unit's signals.
3 Indicator
Illuminated when the remote control unit signals are being output.
4 [A/V Mute] button (see page 52)
Temporarily erases the images and sound. Projection will be resumed if this button is
pressed once more or the volume is adjusted. User logos can be set up for projection when
in the mute mode.
5 [E-Zoom] button (see page 55, 59)
Enlarges the image with the E-Zoom function. Enlarges the sub-screen when using P in P
images. Press the [ESC] key to cancel this mode.
6 [Effect] button (see page 56)
Executes the allocated effect function. Press the [ESC] key to cancel this mode.
7 [ (Light)] button
The remote control button will be illuminated for approximately ten seconds.
8 [Power] button (see page 40, 43)
Switches the power supply to the projector on and off.
9 [R/C ON OFF] switch (see page 40, 44)
Switches the remote control unit on and off. The remote control unit cannot be used for
operations when this switch is not set at [ON].
10 [Enter] button (see page 34, 63)
· Sets the menu item when pressed, and then moves onto the lower stage. Becomes a cur-
sor key to select the menu items when moved up, down, left or right.
· This function operations with a left-hand click on the mouse when computer images are
being projected. The pointer will move when this button is moved up, down, left or right.
2
1
Freeze
4
A/V Mute
5
E-Zoom
3
Enter
7
11
Esc
3
Power
8
9
R/C ON
OFF
6
10
Parts, Names and Operations - 17