Adjusting the Projection Size
It is possible to adjust the size of the projection and correct any trapezoid distortion.
Point
A function to resize the screen (see page 53) and an E-Zoom function for enlarging certain
areas (see page 55) are also available.
Zoom adjustment
1
Rotate the Zoom Ring to make the required adjustments (enlargment up to a maximum
of 1.4x is possible).
The projection distance must also be adjusted when enlarging the screen. (see page 23)
Point
If optional lenses are to be used, refer to the relevant instruction manuals for further details.
Trapezoid adjustment
Make the necessary adjustment when the screen has been distorted into a trapezoid with foot
adjustment.
1
Press the [Keystone +, -] button to lengthen the screen sidewards.
Keystone
Volume
The corrected screen will shrink in size.
Point
· The screen will be reduced in size when trapezoid correction has been performed.
· The status of trapezoid correction will be recorded. Perform readjustments that match the
installation position when the projection position or angle have been changed.
· Reduce the sharpness if blurring occurs after trapezoid correction. (see page 65)
· Trapezoid correction is performed from the menu. (see page 67)
46 - Adjusting the Projection Size
Becomes smaller
Power
Menu
Help
Esc
Computer
Video
A/V mute
Keystone
Resize
Volume
Shift
Becomes larger
Power
Help
Computer
Video
Keystone
A/V mute
Resize
Volume
The corrected screen will shrink in size.
Menu
Esc
Keystone
Volume
Shift