Exit Menu - Intel STL2 - Server Board Motherboard Product Manual

Boot Device Priority Submenu
Use the up or down arrow keys to select a device; then press the <+> or <-> keys to move the
device higher or lower in the boot priority list.
Boot Priority Device
1. Diskette Drive
2. ATAPI CD-ROM Drive
3. Hard Drive
4. Intel UNDI, PXE-2.0
Hard Drive Submenu
Choices
Hard Drive 1
Hard Drive 2
Hard Drive 3
Bootable Add in Card
Removable Devices
Choices
Diskette A

Exit Menu

You can make the following selections on the Exit Menu. Select an option using the up or down
arrow keys; then press <Enter> to execute the option. Pressing <Esc> does not exit this menu.
You must select one of the items from the menu or menu bar to exit.
Choices
Save Changes & Exit
Exit Without Saving Change
Get Default Values
Load Previous Values
Save Changes
Configuration Software and Utilities
Description
Attempts to boot from the diskette drive.
Attempts to boot from an ATAPI CD-ROM drive.
Attempts to boot from a hard drive device.
Attempts to boot from a network connection.
Requires the presence of a PXE server.
Description
Autodetected hard drive.
Autodetected hard drive.
Autodetected hard drive.
Autodetected Add-in card.
Description
Autodetected diskette drive.
Description
Exits after writing all modified Setup item values to NVRAM.
Exits leaving NVRAM unmodified.
Loads default values for all Setup items.
Loads values of all Setup items from previously saved custom defaults.
Writes all Setup item values to NVRAM.
41