Exit Menu - Intel SE7500CW2 Product Manual

Table 21. System Menu (continued)
Feature
Peripherals
BIOS

Exit Menu

To access this menu, select Exit on the menu bar at the top of the screen.
Main Advanced
Table 22 lists the options available in the Exit menu. Select an option using the up or down arrow
keys; then press <Enter> to execute the option. Pressing <Esc> does not exit this menu. You must
select one of the items from the menu or menu bar to exit.
Table 22.

Exit Menu

Choices
Exit Saving Changes
Exit Discarding Changes
Load Setup Defaults
Discard Changes
Save Changes
Load Custom Default
Save Custom Default
Configuration Software and Utilities
Choices Description
Provides the port connectors for onboard designators. None of
<Enter>
these can be modified in user mode
Port
Connector
J44
J28
J101
J46
J46
J4
J5
J6
<Enter> ROM SIZE: 1024 KB
Vendor: Phoenix Technologies LTD
Version: 1.14
Release Date: 2/22/2002 – creation date
Security Power
Description
Exits after writing all modified Setup item values to CMOS.
Exits leaving CMOS unmodified. User is prompted if any of the setup
fields were modified.
Loads default values for all Setup items.
Reads previous values of all Setup items from CMOS.
Writes all Setup item values to CMOS.
Loads custom default values for all setup items.
Saves all Setup item values to NVRAM as a custom default.
On Board Port
Designator Connector
COM 1 J7
COM 2
LPT 1 J10
PS/2 Keyboard J42
PS/2 Mouse J107
Primary IDE J108
Secondary IDE J43
ATA100
Primary IDE
J11
Boot System
On Board
Designator
ATA100
Secondary IDE
Floppy
VGA Conn
LAN 1
LAN 2
USB1 & USB2
& USB3
USB 4
Exit
41