Table 24.
System Menu (continued)
Feature
Peripherals
BIOS
Exit Menu
To access this menu, select Exit on the menu bar at the top of the screen.
Main
Advanced
Table 25 lists the options available in the Exit menu. Select an option using the up or down arrow
keys; then press <Enter> to execute the option. Pressing <Esc> does not exit this menu. You must
select one of the items from the menu or menu bar to exit.
Table 25.
Exit Menu
Choices
Exit Saving Changes
Exit Discarding Changes
Load Setup Defaults
Discard Changes
Save Changes
Load Custom Default
Save Custom Default
42
Choices
Description
<Enter>
Provides the port connectors for onboard designators. None of
these can be modified in user mode
Port
Connector
J52 & J28
J47
J54
J7
J8
<Enter>
ROM SIZE: 1024 KB
Vendor: Phoenix Technologies LTD
Version: 1.14
Release Date: 1/10/2003 – creation date
Security
Power
Description
Exits after writing all modified Setup item values to CMOS.
Exits leaving CMOS unmodified. User is prompted if any of the setup
fields were modified.
Loads default values for all Setup items.
Reads previous values of all Setup items from CMOS.
Writes all Setup item values to CMOS.
Loads custom default values for all setup items.
Saves all Setup item values to NVRAM as a custom default.
On Board
Port
Designator
Connector
Serial A and B
J12
Parallel
Keyboard /
J53
mouse
Primary IDE
J48 & J45
Secondary IDE
J10 & J50
Boot
System
Intel Server Board SE7501CW2 Product Guide
On Board
Designator
Floppy
Video
NIC1 and NIC2
USB
Exit