5.12 Flash Architecture And Flash Update Utility; Table 62. Bios Setup, Exit Menu Selections - Intel SE7520AF2 Technical Product Specification

Intel® Server Board SE7520AF2 TPS
Critical Event Logging
ECC Event Logging
PCI Error Logging
PCI Express Error
Logging
System Bus Event
Logging
Hub Interface Event
Logging
Memory Buffer Event
Logging
5.11.5.6 Exit menu
Feature Options
Save Changes N/A
and Exit
Discard N/A
Changes and
Exit
Discard N/A
Changes
Load Optimal N/A
Defaults
Load Custom N/A
Defaults
Save Custom N/A
Defaults

5.12 Flash Architecture and Flash Update Utility

The flash ROM contains system initialization routines, the BIOS Setup Utility, and runtime
support routines. The exact layout is subject to change, as determined by Intel. A 64 KB user
block is available for user ROM code or custom logos. The flash ROM also contains initialization
code in compressed form for on-board peripherals, like SCSI, NIC and video controllers. The
flash ROM also contains support for the Rolling Single Boot BIOS update feature.
The complete ROM is visible, starting at physical address 4 GB minus the size of the flash ROM
device. The Flash Memory Update utility loads the BIOS image minus the recovery block to the
secondary flash partition, and notifies the BIOS that this image should be used on the next
Revision 1.2
Disabled If enabled, BIOS will detect and log events for
system critical errors. Critical errors are fatal
Enabled
to system operation. These errors include
PERR, SERR, ECC.
Disabled Enables or Disables ECC Event Logging.
Enabled
Disabled Enables or Disables PCI Error Logging.
Enabled
Disabled Enables or Disables PCI Express Error
Logging.
Enabled
Disabled Enables or Disables System Bus Event
Logging.
Enabled
Disabled Enables or Disables Hub Interface Event
Logging.
Enabled
Disabled Enables or Disables Memory Buffer Event
Logging.
Enabled

Table 62. BIOS Setup, Exit Menu Selections

Exit system setup after saving the changes.
F10 key can be used for this operation.
Exit system setup without saving any changes.
ESC key can be used for this operation.
Discards changes done so far to any of the setup questions.
F7 key can be used for this operation.
Load Setup Default values for all the setup questions.
F9 key can be used for this operation.
Load custom defaults.
Save custom defaults
Intel order number C77866-003
Enable SMM handlers to
detect and log events to
SEL.
Grayed out if "Critical Event
Logging" option is disabled.
Grayed out if "Critical Event
Logging" option is disabled.
Grayed out if "Critical Event
Logging" option is disabled.
Grayed out if "Critical Event
Logging" option is disabled.
Grayed out if "Critical Event
Logging" option is disabled.
Grayed out if "Critical Event
Logging" option is disabled.
Help Text
System BIOS
137