Exit Menu - Intel SDS2 Product Manual

Boot Device Priority Submenu
Use the up or down arrow keys to select a device; then press the <+> or <-> keys to move the
device higher or lower in the boot priority list.
Boot Priority Device
1. Removable Devises
2. Hard Drive
3. ATAPI CD-ROM Drive
4. (any) SCSI CD-ROM Drive
5. PXE UNDI, PXE-2.0
Hard Drive Submenu
Choices Description
Drive 1 ... To select the boot drive from this list containing all bootable devices in the system, use
the up and down arrows to highlight a device, then press the plus (+) key to move it to the
top of the list or the m inus (-) key to move it down.
Removable Devices
Choices Description
Diskette A Autodetected diskette drive

Exit Menu

You can make the following selections on the Exit Menu. Select an option using the up or down
arrow keys; then press <Enter> to execute the option. Pressing <Esc> does not exit this menu.
You must select one of the items from the menu or menu bar to exit.
Choices
Exit Saving Changes
Exit Discarding Changes
Load Setup Defaults
Load Custom Defaults
Discard Changes
Save Changes
56
Description
Attempts to boot from the diskette drive or
removeable device like the LS-120.
Attempts to boot from a hard drive device.
Attempts to boot from an ATAPI CD-ROM drive
containing bootable media. This entry appears if
there is a bootable CD-ROM that is in a BIOS Boot
Specification-compliant SCSI CD-ROM.
Attempts to boot from a SCSI CD-ROM drive.
Attempts to boot from a network connection.
Requires the presence of a PXE server.
Description
Exits after writing all modified Setup item values to NVRAM
Exits leaving NVRAM unmodified
Loads default values for all Setup items
Loads values of all Setup items from previously saved custom defaults
Read previous values of all Setup items from NVRAM
Writes all Setup item values to NVRAM
Intel Server Board SDS2 Product Guide