Security Menu - Intel STL2 - Server Board Motherboard Product Manual

Product guide
Hide thumbs Also See for STL2 - Server Board Motherboard:
Table of Contents

Advertisement

Security Menu

You can make the following selections on the Security Menu itself. Enabling the Supervisor
Password field requires a password for entering Setup. The passwords are not case-sensitive.
Feature
Supervisor
Password is
User Password is
Set Supervisor
Password
Set User Password
Password on Boot
Fixed Disk Boot
Sector
Diskette Access
Power Switch Mask
Secure Mode
Option ROM Menu
Mask
Secure Mode Submenu
Feature
Secure Mode Timer
Secure Mode Hot Key
Ctrl-Alt-[ ]
Secure Mode Boot
Floppy Write Protect
Configuration Software and Utilities
Choices
Description
Clear
Status only; user cannot modify.
Set
Clear
Status only; user cannot modify. Once set, this can be disabled
Set
by setting it to a null string, or by clearing password jumper on
server board.
Press Enter
When the <Enter> key is pressed, you are prompted for a
password; press ESC key to abort. Once set, this can be cleared
by setting it to a null string, or by clearing password jumper on
server board (see Server Board Jumpers in Chapter 5).
Press Enter
When the <Enter> key is pressed, you are prompted for a
password; press ESC key to abort. Once set, this can be cleared
by setting it to a null string, or by clearing password jumper on
server board (see Server Board Jumpers in Chapter 5).
Disabled
Requires password entry before boot. System will remain in
Enabled
secure mode until password is entered. Password on Boot takes
precedence over Secure Mode Boot.
Normal
Protects the boot sector on the boot drive against some viruses.
Write Protect
Everyone
Limits the use of the diskette drive to system supervisors.
Supervisor
Supervisor password must be set to enable this feature.
Unmasked
If set to Masked, you cannot turn off the power using the power
Masked
switch after rebooting the OS.
Enters Submenu. This is only available if both the user and
supervisor passwords are set.
Unmasked
If set to masked, you cannot enter the Adaptec BIOS
Masked
configuration by pressing CNTL A.
Choices
Description
Disabled
Period of keyboard/PS/2 mouse inactivity specified for secure
1 min
mode to activate. A password is required for secure mode to
2 min
function. Cannot be enabled unless at least one password is
5 min
enabled.
10 min
20 min
1 hr
2 hr
Disabled
Enables Quicklock feature Cannot be enabled unless at least
Enabled
one password is enabled.
[ ]
Key assigned to start the Quicklock feature.
[0-9, A, B, ..., Z]
Disabled
System will boot in secure mode. You must enter a
Enabled
password to unlock the system. Cannot be enabled unless at
least one password is enabled.
Disabled
When secure mode is activated, the diskette drive is write
Enabled
protected. You must enter a password to disable. Cannot be
enabled unless at least one password is enabled.
39

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents