Figure 23. Setup Utility - Console Redirection Screen Display; Table 30. Setup Utility - Console Redirection Configuration Fields - Intel S3200SHV - Entry Server Board Motherboard Specification

Intel® Server Boards S3200SH/S3210SH TPS
Console Redirection
Console Redirection
Flow Control
Baud Rate
Terminal Type
Legacy OS Redirection
Figure 23. Setup Utility — Console Redirection Screen Display
Table 30. Setup Utility — Console Redirection Configuration Fields
Setup Item
Console Redirection
Flow Control
Baud Rate
Terminal Type
Legacy OS
Redirection
64
Server Management
Disabled / Serial A / Serial B
None / RTS/CTS
9.6k / 19.2k / 38.4k / 57.6k / 115.2k
PC-ANSI / VT100 / VT100+ / VT-UTF8
Disabled / Enabled
Options
Console redirection allows a serial port to be used for
Disabled
server management tasks.
Serial A
[Disabled] - No console redirection.
Serial B
[Serial Port A] - Configure serial port A for console
redirection.
[Serial Port B] - Configure serial port B for console
redirection.
Enabling this option will disable display of the Quiet
Boot logo screen during POST.
Flow control is the handshake protocol.
None
RTS/CTS Setting must match the remote terminal application.
[None] - Configure for no flow control.
[RTS/CTS] - Configure for hardware flow control.
9600 Serial port transmission speed. Setting must match
the remote terminal application.
19.2K
38.4K
57.6K
115.2K
PC-ANSI Character formatting used for console redirection.
Setting must match the remote terminal application.
VT100
VT100+
VT-UTF8
This option will enable legacy OS redirection (i.e.,
Disabled
DOS) on serial port. If it is enabled the associated
Enabled
serial port will be hidden from the legacy OS.
Intel Order Number: E14960-009
Help Text
System BIOS
Revision 1.8