Ite It8212 Raid Bios Setup Utility - Intel i915G User Manual

C-2 ITE IT8212 RAID BIOS Setup Utility (Optional)
The IT8212F RAID controller Setup Utility provides functions to create, delete and
rebuild an array. Power on the system and wait for the following screen to appear.
Press "Ctrl-F" or "Ctrl-E" keys to enter Setup Utility or press the "Esc" key to skip
and boot directly.
There are five options in the Setup Utility Main Menu, please press 1 ~ 5 to enter
the submenu or the "Esc" key to quit the Setup Utility.
If you are not familiar with the array setting, please follow the procedures in Auto
Configuration to create new arrays automatically. You can use Define RAID and
Delete RAID to manually create or delete arrays. You can also use Rebuild RAID
selection to help you rebuild a mirrored (RAID 1 or RAID 0+1) array. Besides, you
can use RAID Card Configuration to see the controller's resources, each hard
drive's status and the setting of the IT8212F RAID controller.
1. Auto Configuration
Click "1" on the Main Menu to enter Auto Configuration. You can use arrow keys
→ and ← and the "space" bar key to change your option. After selecting your
option, you can press "Ctrl-Y" keys to save the setting. Press "Esc" key to go
back to the Main Menu.
Appendix
C-3