Cancelling Direct Transmission - Kyocera TASKalfa 250ci Operation Manual

Cancelling and Sending Delayed Transmissions (Queued)
To cancel delayed transmissions that are queued, or to send delayed transmissions immediately rather than
waiting for the specified time, use the procedure below.
Status
Status Scheduled Job
Job No. Accepted Time Type Destination
0007 9:30 A OFFICE
Cancel Start Now
Printing Jobs Sending Jobs Storing Jobs
Status

Cancelling Direct Transmission

During direct transmission, to cancel communication during transmission, press the Stop key on the operation
panel or [Cancel] on the touch panel. The originals that have been scanned are ejected, and the screen returns
to the send default screen. When originals remain in the document processor, take them out.
Cancelling Transmission (Disconnection of Communication)
When you cancel sending or receiving by disconnecting the telephone line during communication, use the
following procedure.
NOTE:
When 2 optional FAX Kits (Dual FAX option) are installed, disconnect the line currently being used for
communication.
OPERATION GUIDE
1
2
3
Log
User Name Start Time
12:00
1/1
Detail
Device/ Paper/Supplies
Communication
10/10/2008 10:10
1
2
Press the Status/Job Cancel key.
Press [Sending Jobs], and then [Scheduled Job].
To cancel a delayed transmission, select the job to
be cancelled and press [Cancel].
When the cancel confirmation screen appears,
press [Yes].
Transmission is canceled.
To send delayed transmission immediately, select
the job to be sent and press [Start Now].
When the send confirmation screen appears, press
[Yes].
Transmission begins.
Press the Status/Job Cancel key.
Press [Device/Communication].
FAX Operation (Basic)
3-15
3