Kyocera TASKalfa 250ci Operation Manual page 36

FAX Operation (Basic)
ECM
Encrypted
Transmission
Selecting the Resolution
3-8
Key
ECM (error correction mode) is a function to
automatically resend an image that has not been
correctly sent or received due to the effects of
noise on the telephone line during transmission.
To change the ECM communication setting, press
this key.
To send faxes using encryption, press this key.
For details, refer to Encryption on page 6-24.
Description
[On Hook]
Press this key to connect to the telephone line.
When the FAX number has been entered, the machine
starts dialing to the receiving system.
After pressing this key, you can dial the number of the
receiving system using the numeric keys. For details,
refer to Manual Send on page 4-12.
Dialing methods without using the numeric keys
• Using the Address Book (Refer to page 3-17.)
• Using One-touch keys (Refer to page 3-29.)
• Using the Speed Dial key (Refer to page 3-32.)
• Manual Redial (recall) (Refer to page 3-33.)
NOTE:
In addition to a fax, you can include e-mail
transmission and folder (SMB/FTP) transmission to
send as one job. For details, refer to the machine's
Operation Guide.
When the destination includes FAX or i-FAX, the FAX or
i-FAX jobs are printed in monochrome and the other
sending jobs are printed as the same color as the
scanned originals.
5
Select the resolution suitable for sending originals.
• 200 × 100 dpi (Normal): when sending originals
with standard size characters
Typical character size: 10.5 point (example:
Resolution Resolution
• 200 × 200 dpi (Fine): when sending originals
with relatively small characters and thin lines
Typical character size: 8 point (example:
Resolution Resolution
)
)
OPERATION GUIDE