Kyocera TASKalfa 250ci Operation Manual page 46

FAX Operation (Basic)
Address:
Name E-mail SMB
Pause Space
Sub Address :
Encryption Key
:
No.
TX Start Speed :
ECM :
Cancel
Status
FAX No. Entry - Sub Address
Sub Address
1234567890
Password
Space
Set sub address.
Enter sub address and password
using numeric keys. (Max. 20 digits)
Status
3-18
FTP FAX i-FAX
Backspace
Change
Change
Change
Change
Back Register
10/10/2008
Backspace
Cancel OK
10/10/2008
NOTE:
For details on character entry, refer to
Character Entry Method on page 2 of the Appendix.
8
Press [FAX].
9
Use the numeric keys to enter the number of the
receiving system.
10:10
NOTE:
Up to 32 digits can be entered as the number
of the receiving system.
Press [Space] to enter a space.
Use [ ] or [ ] to move the cursor.
To correct the fax number, press [Backspace] on the
touch panel, and delete the digits one by one before
reentering the fax number. To delete the number
entirely, press the Clear key on the operation panel.
[Pause]
Pressing this key adds about three seconds of waiting
time during dialing. For example, when dialing the
receiving system on an external line, you can use this
method to insert a pause before resuming dialing after
you dial a specific number.
10
Press [Change] of Sub Address. When you do not
use sub address communication, go to step 14.
11
Press [Sub Address] and enter the sub address
using the numeric keys.
NOTE:
You can use up to 20 digits including the
numbers from 0 to 9, ' (space)', '#' and '*' characters to
enter a sub address.
Press [Space] to enter a space.
Use [ ] or [ ] to move the cursor.
Pressing [Backspace] deletes the character to the left of
the cursor.
10:10
OPERATION GUIDE