Kyocera TASKalfa 250ci Operation Manual page 177

Fax system (q) operation guide rev-1
Hide thumbs Also See for TASKalfa 250ci:
Table of Contents

Advertisement

i-FAX Default Settings
FAX / i-FAX > i-FAX > Defaults
Use this page to enable the internet faxing.
The settings available on the i-FAX Defaults page are shown below.
Item
i-FAX
i-FAX SMTP Settings
FAX/i-FAX > i-FAX > SMTP
Use this page to specify the settings for the SMTP server used for Internet faxing.
The settings available on the i-FAX SMTP page are shown below.
Item
SMTP Port Number
SMTP Server Name
SMTP Server Timeout
Authentication Protocol
Authenticate as
Login User Name
Login Password
POP before SMTP
Timeout
Test
E-mail Size Limit
Sender Address
Signature
After completing the settings, click Submit to save the settings.
OPERATION GUIDE
Enables or disables i-FAX. Set to On to enable.
Set the port number used by SMTP. Normally, 25 is used.
Enter the SMTP server name or SMTP server IP address. You can enter up to
64 characters.
If you enter the server name, you must specify the IP address of the DNS
server. You can enter the DNS server IP address in the TCP/IP settings
screen. Refer to the machine's Operation Guide for details.
Enter the timeout period in seconds.
Specify whether SMTP authentication will be used or whether POP before
SMTP will be used. This SMTP authentication is compatible with Microsoft
Exchange 2000.
Specify the i-FAX user POP3 account or specify another account and the user
who will provide authentication.
If you selected Other in the user setting, enter the user name used for
authentication. You can enter up to 64 characters.
If you selected Other in the user setting, enter the login user password used
for authentication. You can enter up to 64 characters.
If you selected POP before SMTP in the authentication setting, specify the
timeout period in seconds.
Runs a test to determine whether the settings specified in this page are
correct.
Enter the maximum size for E-mails that can be sent in kilobytes. Entering 0
disables this setting.
Displays the address registered as the E-mail address in the i-FAX POP3
settings.
Displays a text format signature that is inserted at the end of each E-mail
message. To change the signature, go to Advanced > E-mail > SMTP >
General and edit the signature.
Internet Faxing (i-FAX) (Option)
Description
Description
8
8-5

Advertisement

Table of Contents
loading

Table of Contents