Cancelling Direct Transmission - Kyocera ECOSYS FS-1135MFP Operation Manual

Cancelling and Sending Delayed Transmissions (Queued)
To cancel delayed transmissions that are queued, or to send delayed transmissions immediately rather than waiting
for the specified time, use the procedure below.
Scheduled Job:
0011
0017
0018 *********************
[ Cancel ]

Cancelling Direct Transmission

During direct transmission, to cancel communication during transmission, press the Stop key on the operation panel.
The originals that have been scanned are ejected, and the screen returns to the default screen for sending. When
originals remain in the document processor, take them out.
Cancelling Transmission (Disconnection of Communication)
When you cancel sending or receiving by disconnecting the telephone line during communication, use the following
procedure.
a b
Broadcast
0324256345
0756545865
[ Menu ]
1
Press the Status/Job Cancel key.
2
Press the  or  key to select [Scheduled Job].
3
Press the OK key.
4
Press the  or  key to select the job you want to
cancel. Or, select the job you want to send immediately.
5
Press [Menu] (the Right Select key).
6
Press the  or  key to select [Cancel Job]. Or, select
[Start Now] to send the job immediately.
7
Press the OK key.
8
Press [Yes] (the Left Select key). Communication is
canceled. Or, communication starts if sending the job
immediately.
1
Press the Status/Job Cancel key.
2
Press the  or  key to select [FAX].
3
Press the OK key.
3-12
FAX Operation (Basic)