Media Type For Print Output - Kyocera TASKalfa 250ci Operation Manual

Media Type for Print Output

Specify the paper type to be used for print output of the received fax.
Supported paper types: All Media Types, Plain, Rough, Recycled, Bond, Color, High Quality, Custom 1 to 8
NOTE:
Refer to the machine's Operation Guide for details on Custom Paper 1 to 8.
FAX - Media Type
Set the paper to use for faxes.
All Media Plain Rough
Types
Color High Quality Custom 1
Custom 5
Custom 4 Custom 6
Status
Setting the cassette for the print output of received faxes
By specifying the media type, faxes can be received on the corresponding cassette. Faxes will be automatically
reduced to the set paper size.
OPERATION GUIDE
Recycled Bond
Custom 2 Custom 3
Custom 7 Custom 8
Cancel OK
10/10/2008 10:10
1
Press the System Menu key.
2
Press [FAX], [Next] of Reception, [Next] of Basic
and then [Change] of Media Type.
3
Select the desired paper type. If no specific paper
type is selected, press [All Media Types].
4
Press [OK].
1
Press the System Menu key.
2
Press [Common Settings], [Next] of Original /
Paper Settings, [Next] of Cassette Setting.
3
Cassette Setting, select one of [Cassette 1] to
[Cassette 4] and press [Next].
Press [Change] of Paper Size.
NOTE:
[Cassette 3] and [Cassette 4] are shown when
the optional paper feeder is installed.
4
For automatic detection of the paper size, press
[Auto] and select [Metric] or [Inch] as the unit.
Setup and Registration
6-11
6