Kyocera TASKalfa 250ci Operation Manual page 33

Setting for Direct
transmission
On
Selecting the transmission method on the basic send screen
You can also select the transmission method on the basic send screen.
Ready to send.
Place original.
Destination
A OFFICE 1234567890
B OFFICE 1234568907
C OFFICE 1234569078
On Hook Direct Chain Detail/Edit
0001 0002 0003
AAA BBB CCC DDD
0006 0007 0008
FFF GGG HHH III
Destination Quick Setup Original/Sending
Data Format
Status
OPERATION GUIDE
Starts direct transmission.
Dials the receiving system, and after the communication has
started, originals are scanned.
Destination
Detail
Address
Book
E-mail
1/1
Addr Entry
Folder Path
Entry
Delete Recall
FAX No.
Entry
0004 0005 No.
EEE i-FAX
Addr Entry
0009 0010 1/100
WSD Scan
JJJ
Color/ Advanced
Image Quality Setup
10/10/2008 10:10
Description
NOTE:
In direct transmission, you can designate only
one destination for one transmission.
IMPORTANT: You cannot use direct transmission
when the optional Printed Document Guard Kit is
installed.
In the basic screen for sending, press [Direct].
This selects the direct transmission method and the
keys on the touch panel are highlighted.
Press the highlighted [Direct] key to change the
transmission method to memory transmission.
Memory Transmission (When originals are placed
in the document processor)
After originals placed in the document processor are
scanned and stored in the memory, the receiving
system is dialed. This method is very convenient
because you can have originals returned to you without
waiting for sending of the originals to be completed. It is
suitable for sending multiple-page sheet originals.
Memory Transmission (When originals are placed
on the glass surface)
This method is suitable for sending book originals that
cannot be placed in the document processor. After
originals placed on the glass surface are scanned and
stored in the memory, the receiving system is dialed.
NOTE:
When continuous scan is set, you can continue
with scanning of a next original after an original on the
glass surface has been stored in memory. Every time
one page is scanned, you perform an operation to allow
continued scanning, and after all the originals have
been stored in memory, the receiving system is dialed.
FAX Operation (Basic)
3-5
3