Setting Up The Printer After Transporting It - Epson Pro 5000 Reference Manual

Setting up the printer after transporting it

The steps you need to take to set up the printer after
transporting it are almost identical to the steps carried out the
first time you set up the printer. When you set up the printer
again, refer to the Setup Guide . However there are some points
to be noted:
The first time you start printing after transporting the
printer, the print head nozzles may be clogged. EPSON
recommends you clean the print head after transporting
the printer. See page 8-37 for more information.
EPSON recommends installing new ink cartridges after
transporting the printer. If you reinstall the cartridges you
removed before transporting, the printer cannot determine
the correct level of remaining ink and the ink out light may
not flash to warn you when the cartridge is almost out of
ink.
Maintenance and Transportation
7
7-9