Ejected paper is wrinkled.
Cause
The paper is damp.
The paper is too thin.
Paper does not fully eject.
Cause
The paper is too long.
Paper does not fully eject.
Cause
The paper size and/or media
type lever positions are not
correct.
What to do
Do not store your paper in a damp or
humid environment. Store paper in its
original packaging.
Make sure the paper meets the paper
requirements for this printer. See
"Paper" on page A-2.
What to do
Press the Eject button to eject the
paper. Use paper that meets the paper
requirements for this printer. See
"Paper" on page A-2.
What to do
Make sure that all the printer driver
settings, paper size and media type
lever positions on the paper tray, and
paper loaded in the paper tray match.
If you are loading paper that is not
listed on the lever position settings,
select Other.
Troubleshooting
8
8-19