Printing On Photo Quality Glossy Film And Ink Jet Transparencies - Epson Pro 5000 Reference Manual

Printing on Photo Quality Glossy Film and Ink Jet
Transparencies
When printing on Photo Quality Glossy Film and Ink Jet
transparencies, please follow the instructions below:
1. See the table below, and determine the most appropriate paper
path. Then load transparencies or glossy film according to the
instructions in Chapter 2, "Paper Handling."
Paper path
Paper tray
Lower paper tray
Front manual
feed slot
Rear manual
feed slot
Note:
The paper sizes you can load and the direction you load the paper
varies depending on the paper path. See page 2-3 for details.
Printable side
Down: load the
transparency or glossy film in
the paper tray with the cut
corner located on the right
side of the trailing edge.
Down: load the
transparency or glossy film
in the front manual feed
slot with the cut corner
located on the right side
of the trailing edge.
Up: load the transparency
or glossy film in the rear
manual feed slot with the
cut corner located on the
right side of the trailing edge.
Printing on Various Kinds of Paper
Remarks
Paper loading capacity
varies depending on the
media type. See page 2-5.
If a support sheet is
packed with the Glossy
Film, put the support sheet
or a piece of plain paper
under the stack of Glossy
Film.
You can load one sheet at
a time.
1
1-13