Setting Up The Printer After Transporting It - Epson Stylus Pro 7450 User Manual

Setting up the printer after transporting it

The steps you need to take to set up the printer after transporting
it are almost identical to the steps carried out the first time you
set up the printer. When you set up the printer again, see the
Unpacking and Setup Guide, and note the following points.
❏ Do not forget to remove any protective materials.
❏ The first time you start printing after transporting the printer,
or if you have not turned on the printer for a long time, the
print head nozzles may be clogged. Epson recommends that
you perform a nozzle check and clean the print head, and also
realign the print head to ensure print quality.
To perform a nozzle check using the control panel, see
"Checking the print head nozzles" on page 176.
To perform a nozzle check using the printer software, see
"Using the Printer Utilities" on page 31 for Windows or
"Using Printer Utilities" on page 53 for Mac OS X.
To clean the print head using the control panel, press the
Menu r button for 3 seconds.
To clean the print head using the printer software, see "Using
the Printer Utilities" on page 31 for Windows or "Using
Printer Utilities" on page 53 for Mac OS X.
To realign the print head using the control panel, see
"Aligning the print head" on page 178.
To realign the print head using the printer software, see
"Using the Printer Utilities" on page 31 for Windows or
"Using Printer Utilities" on page 53 for Mac OS X.
Maintenance and Transportation
283