Power supply
The lights come on briefly but then go off and stay off.
Cause
The printer's voltage rating
may not match the voltage of
your electrical outlet.
The printer does not work and the control panel lights are off.
Cause
The printer is turned off.
The power cord is not
properly plugged into the
electrical outlet.
The electrical outlet is
controlled by an outside
switch or automatic timer.
The electric outlet is out of
order.
8-10
Troubleshooting
What to do
Check the printer and outlet voltage
ratings. If the voltages do not match,
unplug the printer immediately and
contact your dealer.
M
Warning:
Do not reconnect the power cord to an
electrical outlet that does not have
matching voltage.
What to do
2
Press the
Operate button.
2
The
Operate light will come on.
Turn off the printer, make sure the
power cord is firmly plugged into the
electrical outlet, and turn the printer
back on.
Use a different outlet.
Plug another electrical device into the
outlet to determine whether the outlet
is working. If it is not, use a different
outlet.