Setting Up The Printer After Transporting It - Epson Stylus Pro 10600 Reference Manual

4. Move the printer to the place of use carefully. Relock the
casters and extend the stabilizer knobs after moving.

Setting up the printer after transporting it

The steps you need to take to set up the printer after transporting
it are almost identical to the steps carried out the first time you
set up the printer. When you set up the printer again, see the
Assembly and Setup Guide, and note the following points:
❏ Do not forget to remove any protective material (such as tape
from the ink cartridge clamps).
❏ The first time you start printing after transporting the printer,
the print head nozzles may be clogged. EPSON recommends
you perform a nozzle check and clean the print heads, and
also realign the print heads to ensure print quality. See "Using
the Printer Utilities" for Windows, or "Using the Printer
Utilities" for Macintosh.
-236