Using The Cd-Rom Drive - Intergraph StudioZ GT RAX Setup Manual

Floppy Disk Drive

Using the CD-ROM Drive

The system's CD-ROM drive occupies a 5.25-inch external peripheral device bay, and is
accessible through a tray or a slot at the front of the base unit. The drive supports software
ejection of discs and has an external amplified headphone jack.
To use the CD-ROM drive:
To insert a disc into a tray-load CD-ROM drive, press the eject button to extend the tray.
Place the disc, printed side up, in the tray and press the eject button to load the disc.
To insert a disc into a slot-load CD-ROM drive, insert the disc, printed side up, into the slot.
To eject a disc from the CD-ROM drive, press the eject button adjacent to the CD-ROM drive
slot or tray. If the software application being used prevents the disc from ejecting, run the
proper application command to eject the disc.
The media player application program(s) included with the operating system allows you to
listen to audio compact discs. Insert an audio compact disc, printed side up, into the
CD-ROM drive and start the media player application. Adjust the volume using the operating
system's sound control programs. You can connect headphones to the headphone port on the
CD-ROM drive.
CD-ROM Drive
41