Table of Contents
Advertisement
66
Audio
No sound can be heard
Reason
Volume of speakers is low or off.
Speaker cable is not properly connected.
Volume is turned off in the Volume Control
program.
Headphones are plugged into the system.
Network
Cannot connect to other systems on LAN
Reason
Ethernet cable disconnected.
Incorrect software configuration.
Cannot plot to network printer or plotter on LAN
Reason
Network cable disconnected.
Printer or plotter not added to Print Manager
on your system.
Plot node does not recognize your system.
Peripheral Drive Errors
CD-ROM drive LED does not light when system power is on
Reason
CD-ROM drive power cable or data cable not
attached.
Solution
Adjust volume up.
Verify cable connection.
Double-click the speaker icon in the taskbar tray
and increase the master volume.
Unplug the headphones.
Solution
Reconnect Ethernet cable and ensure proper connection. If
cable is properly connected, notify your System
Administrator.
Notify your System Administrator.
Solution
Reconnect network cable, ensure proper
connection.
Notify your System Administrator.
Notify your System Administrator.
Solution
Open the base unit and ensure power cable and
data cable are properly attached. See the System
Reference.
Advertisement
Table of Contents
Need help?
Do you have a question about the StudioZ GT RAX and is the answer not in the manual?
Questions and answers