Main Screen; System Time; System Date - Intergraph StudioZ GT RAX Setup Manual

BIOS Setup has five primary configuration screens (listed across the top of the screen):
Main
Advanced
Boot
Security
Exit
Each of these screens is described in the remaining sections of this chapter.

Main Screen

To access the Main screen, use the arrow keys to highlight Main on the BIOS Setup main menu.
The Main screen displays. This screen is used for configuring the following system information:
System time and system date
Legacy diskette A and B
Primary/secondary master
Disk access mode
Keyboard features
PS/2 mouse functionality
System memory
This section explains how to configure each of these parameters. To move between the
parameters, use the up and down arrow ( and ) keys.

System Time

To set the system time, use
Use the plus key (+) to increase the number; use the minus key (-) to decrease the number. To
select a previous field, press

System Date

To set the system date, highlight the System Date field, and then use
plus and minus keys as described above to set the date. To select a previous field, press
+ .
SHIFT TAB
to move the prompt and select a field (hours, minutes, or seconds).
TAB
+ .
SHIFT TAB
to select a field. Use the
TAB
47